A & C Metals Logo
 
Alloy Bars
 
   
STEEL ALLOY SQUARES
COLD FINISHED
4142* Annealed
(4140 Available)
 Top
ASTM A 108
Standard Lengths: 12 Ft. Random
 Chemical Composition1     Mechanical Properties1
CHEMICAL COMPOSITION:
Composition Limits, Per Cent—Iron and Normal Impurities Constitute Remainder
ASTM/AISI
Grade		 UNS
Number		 C Mn P
Max.		 S
Max.		 Si Cr Mo
4142 G41420 .40/.45 .75/1.00 .035 .040 .15/.35 .80/1.10 .15/.25
MECHANICAL PROPERTIES:
ASTM/AISI
Grade		 Mechanical Properties
Tensile
Strenght
(ksi)dagger		 Yield
Strength
(ksi)dagger		 Elongation
in 2"
%		 Reduction
of Area
%
4142 105/102 85/95 15/25 45/55
Condition of Steel Typical Hardness Average
Machinability
% of CD 1215
Brinell Rockwell
Annealed Cold Drawn 215/235 B96/100 65
Horizontal Linedagger 1 Ksi = 1000 psi
Size in
Inches		 Lbs.
Per Ft.		 Est. Lbs.
12' Bar
   1/4     .2125     2.550
   3/8     .4781     5.737
   1/2     .8500 10.20
   9/16 1.076 12.91
   5/8 1.328 15.94
   3/4 1.913 22.96
   7/8 2.603 31.24
1" 3.400 40.80
 
Size in
Inches		 Lbs.
Per Ft.		 Est. Lbs.
12' Bar
1-1/8 4.303 51.64
1-1/4 5.313 63.76
1-3/8 6.428 77.14
1-1/2 7.650 91.80
1-3/4 10.41     124.9    
2" 13.60     163.2    
2-1/2 21.25     255.0    
3" 30.60     367.2    
”H” Band version available
*May be available Calcium-Aluminum treated for improved machinability
 
 
1 Disclaimer: All technical data throughout this site is given only as an indication of what may be expected and should under no circumstances be used in specifying the raw materials. The technical data throughout this site has been obtained from a variety of sources we believe to be accurate, but is NOT GUARANTEED. A & C Metals - Sawing, Inc. assumes no liability whatsoever for the use of or reliance upon this information.
  ©   A & C Metals - Sawing, Inc. — All Rights Reserved. | Terms and Conditions | Privacy Policy