bg img A & C Metals Logo bg img
 
Aluminum
 
   
ALUMINUM FLAT SHEET
1100-O
Mill Finish
 Top
Paper Interleaved
AMS-QQ-A-250/1   ASTM B 209   AMS 4001
 Chemical Composition1     Mechanical Properties1

CHEMICAL COMPOSITION:
NOMINAL CHEMICAL COMPOSITION OF WROUGHT ALLOYS
Per Cent of Alloying Elements—Aluminum and Normal Impurities Constitute Remainder
Copper Silicon Man-
ganese		 Mag-
nesium		 Zinc Tita-
nium		 Chro-
mium		 Lead Bismuth
0.12 99.00% Minimum Aluminum

MECHANICAL PROPERTIES:
TYPICAL MECHANICAL PROPERTIES OF WROUGHT ALLOYS
Alloy and Temper UNS Number Tensile Strenght (ksi) Yield (.2%) Strength (ksi) % Elongation -2"
1/16" Thick Specimen 1/2" Diam. Specimen
1100-O A91100 13.0 5.0 35 45
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.050 x 48 x 120 .6984 27.94
     
   
ALUMINUM FLAT SHEET
1100-H14
Mill Finish
 Top
.125" and Heavier — Paper Interleaved
AMS-QQ-A-250/1   ASTM B 209   AMS 4003
 Chemical Composition1     Mechanical Properties1

CHEMICAL COMPOSITION:
NOMINAL CHEMICAL COMPOSITION OF WROUGHT ALLOYS
Per Cent of Alloying Elements—Aluminum and Normal Impurities Constitute Remainder
Copper Silicon Man-
ganese		 Mag-
nesium		 Zinc Tita-
nium		 Chro-
mium		 Lead Bismuth
0.12 99.00% Minimum Aluminum

MECHANICAL PROPERTIES:
TYPICAL MECHANICAL PROPERTIES OF WROUGHT ALLOYS
Alloy and Temper UNS Number Tensile Strenght (ksi) Yield (.2%) Strength (ksi) % Elongation -2"
1/16" Thick Specimen 1/2" Diam. Specimen
1100-H14 A91100 18.0 17.0 9 20
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.040 x 36 x 96 .5645 13.55
.050 x 36 x 96 .7056 16.93
.063 x 36 x 96 .8891 21.34
 
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.090 x 48 x 144 1.270 60.96
.125 x 48 x 144 1.764 84.67
.190 x 48 x 120 2.681 128.7  
     
   
ALUMINUM FLAT SHEET
2024-T3 BARE
Mill Finish
 Top
Paper Interleaved and Identified
AMS-QQ-A-250/4   ASTM B 209   AMS 4037
 Chemical Composition1     Mechanical Properties1

CHEMICAL COMPOSITION:
NOMINAL CHEMICAL COMPOSITION OF WROUGHT ALLOYS
Per Cent of Alloying Elements—Aluminum and Normal Impurities Constitute Remainder
Copper Silicon Man-
ganese		 Mag-
nesium		 Zinc Tita-
nium		 Chro-
mium		 Lead Bismuth
4.4 — 0.6 1.5 — — — — —

MECHANICAL PROPERTIES:
TYPICAL MECHANICAL PROPERTIES OF WROUGHT ALLOYS
Alloy and Temper UNS Number Tensile Strenght (ksi) Yield (.2%) Strength (ksi) % Elongation -2"
1/16" Thick Specimen 1/2" Diam. Specimen
2024-T3 A92024 70.0 50.5 18 —
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.025 x 48 x 144 .3636 17.45
.032 x 48 x 144 .4654 22.34
.050 x 48 x 144 .7272 34.91
.063 x 48 x 144 .9163 43.98
.080 x 48 x 144 1.164   55.87
 
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.090 x 48 x 144 1.309 62.83
.100 x 48 x 144 1.454 69.76
.125 x 48 x 144 1.818 87.26
.160 x 48 x 144 2.327 111.7  
.190 x 48 x 144 2.763 132.6  
*Paper interleaved
     
   
ALUMINUM FLAT SHEET
2024-T3 ALCLAD
Mill Finish
 Top
Paper Interleaved and Identified
AMS-QQ-A-250/5   ASTM B 209   AMS 4041
 Chemical Composition1     Mechanical Properties1

CHEMICAL COMPOSITION:
NOMINAL CHEMICAL COMPOSITION OF WROUGHT ALLOYS
Per Cent of Alloying Elements—Aluminum and Normal Impurities Constitute Remainder
Copper Silicon Man-
ganese		 Mag-
nesium		 Zinc Tita-
nium		 Chro-
mium		 Lead Bismuth
4.4 — 0.6 1.5 — — — — —

MECHANICAL PROPERTIES:
TYPICAL MECHANICAL PROPERTIES OF WROUGHT ALLOYS
Alloy and Temper UNS Number Tensile Strenght (ksi) Yield (.2%) Strength (ksi) % Elongation -2"
1/16" Thick Specimen 1/2" Diam. Specimen
Alclad 2024-T3 A92024 65.0 45.0 18 —
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.020 x 48 x 144 .2909 13.96
.025 x 48 x 144 .3636 17.45
.032 x 48 x 144 .4654 22.34
.040 x 48 x 144 .5818 27.93
 
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.050 x 48 x 144 .7272 34.91
.063 x 48 x 144 .9163 43.98
.080 x 48 x 144 1.164   55.87
     
   
ALUMINUM FLAT SHEET
3003-O
Mill Finish
 Top
Paper Interleaved
AMS-QQ-A-250/2   ASTM B 209   AMS 4006
 Chemical Composition1     Mechanical Properties1

CHEMICAL COMPOSITION:
NOMINAL CHEMICAL COMPOSITION OF WROUGHT ALLOYS
Per Cent of Alloying Elements—Aluminum and Normal Impurities Constitute Remainder
Copper Silicon Man-
ganese		 Mag-
nesium		 Zinc Tita-
nium		 Chro-
mium		 Lead Bismuth
0.12 — 1.2 — — — — — —

MECHANICAL PROPERTIES:
TYPICAL MECHANICAL PROPERTIES OF WROUGHT ALLOYS
Alloy and Temper UNS Number Tensile Strenght (ksi) Yield (.2%) Strength (ksi) % Elongation -2"
1/16" Thick Specimen 1/2" Diam. Specimen
3003-O A93003 16.0 6.0 30 40
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.040 x 48 x 144 .5702 27.37
.050 x 48 x 144 .7128 34.21
.063 x 48 x 144 .8981 43.11
 
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.080 x 48 x 144 1.141 54.77
.090 x 48 x 144 1.283 61.58
.125 x 48 x 144 1.782 85.54
     
   
ALUMINUM FLAT SHEET
3003-H14
Mill Finish
 Top
.125" and Heavier — Paper Interleaved
AMS-QQ-A-250/2   ASTM B 209   AMS 4008
 Chemical Composition1     Mechanical Properties1

CHEMICAL COMPOSITION:
NOMINAL CHEMICAL COMPOSITION OF WROUGHT ALLOYS
Per Cent of Alloying Elements—Aluminum and Normal Impurities Constitute Remainder
Copper Silicon Man-
ganese		 Mag-
nesium		 Zinc Tita-
nium		 Chro-
mium		 Lead Bismuth
0.12 — 1.2 — — — — — —

MECHANICAL PROPERTIES:
TYPICAL MECHANICAL PROPERTIES OF WROUGHT ALLOYS
Alloy and Temper UNS Number Tensile Strenght (ksi) Yield (.2%) Strength (ksi) % Elongation -2"
1/16" Thick Specimen 1/2" Diam. Specimen
3003-H14 A93003 22.0 21.0 8 16
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.020 x 36 x   96 .2851 6.842
  36 x 120   8.553
.025 x 48 x 120 .3564 14.26  
  48 x 144   17.11  
.032 x 36 x   96 .4562 10.95  
  36 x 120   13.69  
  48 x   96   14.60  
  48 x 120   18.25  
  48 x 144   21.90  
.040 x 36 x   96 .5702 13.68  
  36 x 120   17.11  
  48 x   96   18.25  
  48 x 120   22.81  
  48 x 144   27.37  
  60 x   96   22.81  
  60 x 120   28.51  
  60 x 144   34.21  
.050 x 36 x   96 .7128 17.11  
  36 x 120   21.38  
  48 x   96   22.81  
  48 x 120   28.51  
  48 x 144   34.21  
  60 x 120   35.64  
  60 x 144   42.77  
.063 x 36 x   96 .8981 21.55  
  36 x 120   26.94  
  48 x   96   28.74  
  48 x 120   35.92  
 
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.063 x 48 x 144 .8981 43.11
  60 x 120   44.91
  60 x 144   53.89
.080 x 36 x   96 1.141 27.38
  48 x   96   36.51
  48 x 120   45.64
  48 x 144   54.77
  60 x 120   57.05
  60 x 144   68.46
.090 x 36 x   96 1.283 30.79
  36 x 120   38.49
  48 x 120   51.32
  48 x 144   61.58
  60 x 144   76.98
.100 x 36 x   96 1.426 34.22
  48 x 120*   57.04
  48 x 144   68.45
.125 x 36 x   96 1.782 42.77
  36 x 120   53.46
  48 x   96   57.02
  48 x 120   71.28
  48 x 144   85.54
  60 x 144   106.9  
.190 x 48 x 120 2.709 108.4  
  48 x 144   130.0  
  60 x 144   162.5  
.249 x 48 x 144 3.550 170.4  
  60 x 144   213.0  
     
   
ALUMINUM FLAT SHEET
5052-O
Mill Finish
 Top
Paper Interleaved
AMS-QQ-A-250/8   ASTM B 209   AMS 4015
 Chemical Composition1     Mechanical Properties1

CHEMICAL COMPOSITION:
NOMINAL CHEMICAL COMPOSITION OF WROUGHT ALLOYS
Per Cent of Alloying Elements—Aluminum and Normal Impurities Constitute Remainder
Copper Silicon Man-
ganese		 Mag-
nesium		 Zinc Tita-
nium		 Chro-
mium		 Lead Bismuth
— — — 2.5 — — 0.25 — —

MECHANICAL PROPERTIES:
TYPICAL MECHANICAL PROPERTIES OF WROUGHT ALLOYS
Alloy and Temper UNS Number Tensile Strenght (ksi) Yield (.2%) Strength (ksi) % Elongation -2"
1/16" Thick Specimen 1/2" Diam. Specimen
5052-O A95052 28.0 13.0 25 30
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.063 x 48 x 144 .8800 6.842
.090 x 48 x 144 1.257   8.553
 
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.125 x 48 x 144 1.746 83.81
.190 x 48 x 144 2.654 127.4  
     
   
ALUMINUM FLAT SHEET
5052-H32
Mill Finish
 Top
.080" and Heavier — Paper Interleaved
AMS-QQ-A-250/8   ASTM B 209   AMS 4016
 Chemical Composition1     Mechanical Properties1

CHEMICAL COMPOSITION:
NOMINAL CHEMICAL COMPOSITION OF WROUGHT ALLOYS
Per Cent of Alloying Elements—Aluminum and Normal Impurities Constitute Remainder
Copper Silicon Man-
ganese		 Mag-
nesium		 Zinc Tita-
nium		 Chro-
mium		 Lead Bismuth
— — — 2.5 — — 0.25 — —

MECHANICAL PROPERTIES:
TYPICAL MECHANICAL PROPERTIES OF WROUGHT ALLOYS
Alloy and Temper UNS Number Tensile Strenght (ksi) Yield (.2%) Strength (ksi) % Elongation -2"
1/16" Thick Specimen 1/2" Diam. Specimen
5052-H32 A95052 33.0 28.0 12 18
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.020 x 36 x   96 .2794 6.706
.025 x 36 x   96 .3492 8.381
  36 x 120   10.48  
  36 x 144   12.57  
  48 x   96   11.17  
.032 x 36 x   96 .4470 10.73  
  48 x 120   17.88  
  48 x 144   21.46  
.040 x 36 x   96 .5587 13.41  
  36 x 120   16.76  
  36 x 144   20.11  
  48 x   96   17.88  
  48 x 120   22.35  
  48 x 144   26.82  
.050 x 36 x   96 .6984 16.76  
  48 x   96   22.35  
  48 x 120   27.94  
  48 x 144   33.52  
  60 x 144   41.90  
.063 x 38 x   96 .8800 21.12  
  38 x 120   26.40  
  48 x   96   28.16  
  48 x 120   35.20  
  48 x 144*   42.24  
  60 x 144   52.80  
.080 x 36 x   96 1.117   26.81  
  48 x   96   35.74  
  48 x 120   44.68  
  48 x 144   53.62  
  60 x   96   44.68  
  60 x 120   55.85  
  60 x 144   67.02  
 
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.090 x 36 x   96 1.257 30.17
  48 x   96   40.22
  48 x 120   50.28
  48 x 144   60.34
  60 x 144   75.42
.100 x 36 x   96 1.397 33.53
  36 x 120   41.91
  36 x 144   50.29
  48 x 120   55.88
  48 x 144   67.06
.125 x 36 x   96 1.746 41.90
  36 x 120   52.38
  48 x   96   55.87
  48 x 120   69.84
  48 x 144   83.81
  60 x 120   87.30
  60 x 144   104.8  
.160 x 48 x   96 2.235 71.52
  48 x 144   107.3  
.190 x 36 x   96 2.654 63.70
  48 x   96   84.93
  48 x 120   106.2  
  48 x 144   127.4  
  60 x 120   132.7  
  60 x 144   159.2  
  72 x 144   191.1  
.249 x 48 x   96 3.478 111.3  
  48 x 120   139.1  
  48 x 144   166.9  
  60 x 144   208.7  
*Also available paper interleaved
     
   
ALUMINUM FLAT SHEET
5052-H34
Mill Finish
 Top
.090" and Heavier — Paper Interleaved
AMS-QQ-A-250/8   ASTM B 209   AMS 4017
 Chemical Composition1     Mechanical Properties1

CHEMICAL COMPOSITION:
NOMINAL CHEMICAL COMPOSITION OF WROUGHT ALLOYS
Per Cent of Alloying Elements—Aluminum and Normal Impurities Constitute Remainder
Copper Silicon Man-
ganese		 Mag-
nesium		 Zinc Tita-
nium		 Chro-
mium		 Lead Bismuth
— — — 2.5 — — 0.25 — —

MECHANICAL PROPERTIES:
TYPICAL MECHANICAL PROPERTIES OF WROUGHT ALLOYS
Alloy and Temper UNS Number Tensile Strenght (ksi) Yield (.2%) Strength (ksi) % Elongation -2"
1/16" Thick Specimen 1/2" Diam. Specimen
5052-H34 A95052 38.0 31.0 10 14
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.032 x 36 x 120 .4470 17.88
  48 x 144   21.46
.050 x 48 x 120 .6984 27.94
  48 x 144   33.52
 
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.063 x 48 x 120 .8800 35.20
  48 x 144   42.24
.090 x 48 x 120 1.257   50.28
.125 x 48 x   96 1.746   55.87
     
   
ALUMINUM FLAT SHEET
6061-O
Mill Finish
 Top
Paper Interleaved
AMS-QQ-A-250/11   ASTM B 209   AMS 4025
 Chemical Composition1     Mechanical Properties1

CHEMICAL COMPOSITION:
NOMINAL CHEMICAL COMPOSITION OF WROUGHT ALLOYS
Per Cent of Alloying Elements—Aluminum and Normal Impurities Constitute Remainder
Copper Silicon Man-
ganese		 Mag-
nesium		 Zinc Tita-
nium		 Chro-
mium		 Lead Bismuth
0.28 0.6 — 1.0 — — 0.20 — —

MECHANICAL PROPERTIES:
TYPICAL MECHANICAL PROPERTIES OF WROUGHT ALLOYS
Alloy and Temper UNS Number Tensile Strenght (ksi) Yield (.2%) Strength (ksi) % Elongation -2"
1/16" Thick Specimen 1/2" Diam. Specimen
6061-O A96061 18.0 8.0 25 30
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.040 x 48 x 144 .5645 27.10
.050 x 48 x 144 .7056 33.87
.063 x 48 x 144 .8891 42.68
.080 x 48 x 144 1.129   54.19
 
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.100 x 48 x 144 1.411 67.73
.125 x 48 x 144 1.764 84.67
.190 x 48 x 144 2.681 128.7  
     
   
ALUMINUM FLAT SHEET
6061-T4
Mill Finish
 Top
Paper Interleaved and Identified
AMS-QQ-A-250/11   ASTM B 209   AMS 4026
 Chemical Composition1     Mechanical Properties1

CHEMICAL COMPOSITION:
NOMINAL CHEMICAL COMPOSITION OF WROUGHT ALLOYS
Per Cent of Alloying Elements—Aluminum and Normal Impurities Constitute Remainder
Copper Silicon Man-
ganese		 Mag-
nesium		 Zinc Tita-
nium		 Chro-
mium		 Lead Bismuth
0.28 0.6 — 1.0 — — 0.20 — —

MECHANICAL PROPERTIES:
TYPICAL MECHANICAL PROPERTIES OF WROUGHT ALLOYS
Alloy and Temper UNS Number Tensile Strenght (ksi) Yield (.2%) Strength (ksi) % Elongation -2"
1/16" Thick Specimen 1/2" Diam. Specimen
6061-T4, -T451 A96061 35.0 21.0 22 25
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.032 x 48 x 144 .4516 21.68
.040 x 48 x 144 .5645 27.10
.050 x 48 x 144 .7056 33.87
.063 x 48 x 144 .8891 42.68
 
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.080 x 48 x 144 1.129 54.19
.090 x 48 x 144 1.270 60.96
.125 x 48 x 144 1.764 84.67
.190 x 48 x 144 2.681 128.7  
     
   
ALUMINUM FLAT SHEET
6061-T6
Mill Finish
 Top
Paper Interleaved and Identified
AMS-QQ-A-250/11   ASTM B 209   AMS 4027
 Chemical Composition1     Mechanical Properties1

CHEMICAL COMPOSITION:
NOMINAL CHEMICAL COMPOSITION OF WROUGHT ALLOYS
Per Cent of Alloying Elements—Aluminum and Normal Impurities Constitute Remainder
Copper Silicon Man-
ganese		 Mag-
nesium		 Zinc Tita-
nium		 Chro-
mium		 Lead Bismuth
0.28 0.6 — 1.0 — — 0.20 — —

MECHANICAL PROPERTIES:
TYPICAL MECHANICAL PROPERTIES OF WROUGHT ALLOYS
Alloy and Temper UNS Number Tensile Strenght (ksi) Yield (.2%) Strength (ksi) % Elongation -2"
1/16" Thick Specimen 1/2" Diam. Specimen
6061-T6, -T651, -T6511 A96061 45.0 40.0 12 17
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.032 x 48 x 144 .4516 21.68
.040 x 48 x 144 .5645 27.10
.050 x 48 x 144 .7056 33.87
.063 x 36 x   96 .8891 21.34
  48 x 144   42.68
  60 x 144   53.35
.080 x 48 x 144 1.129   54.19
  60 x 144   67.74
.090 x 48 x 120 1.270   50.80
  48 x 144   60.96
  60 x 144   76.20
 
Size in
Inches		   Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Sheet
.100 x 48 x 144 1.411 67.73
.125 x 36 x   96 1.764 42.34
  48 x   96   56.45
  48 x 144   84.67
  60 x 144   105.8  
.160 x 48 x 144 2.258 108.4  
.190 x 36 x   96 2.681 64.34
  48 x 144   128.7
  60 x 144   160.9
 
 
1 Disclaimer: All technical data throughout this site is given only as an indication of what may be expected and should under no circumstances be used in specifying the raw materials. The technical data throughout this site has been obtained from a variety of sources we believe to be accurate, but is NOT GUARANTEED. A & C Metals – Sawing, Inc. assumes no liability whatsoever for the use of or reliance upon this information.
  ©   A & C Metals - Sawing, Inc. — All Rights Reserved. | Terms and Conditions | Privacy Policy