bg img A & C Metals Logo bg img
 
Aluminum
 
   
ALUMINUM ROUND WIRE
IN COILS
1100-O
 Top
ASTM B 211
Coil Sizes:
.100” and Under — 60 lb. cwc
.101” and Larger — 120 lb. cwc
 Chemical Composition1     Mechanical Properties1

CHEMICAL COMPOSITION:
NOMINAL CHEMICAL COMPOSITION OF WROUGHT ALLOYS
Per Cent of Alloying Elements—Aluminum and Normal Impurities Constitute Remainder
Copper Silicon Man-
ganese		 Mag-
nesium		 Zinc Tita-
nium		 Chro-
mium		 Lead Bismuth
0.12 99.00% Minimum Aluminum

MECHANICAL PROPERTIES:
TYPICAL MECHANICAL PROPERTIES OF WROUGHT ALLOYS
Alloy and Temper UNS Number Tensile Strenght (ksi) Yield (.2%) Strength (ksi) % Elongation -2"
1/16" Thick Specimen 1/2" Diam. Specimen
1100-0 A91100 13.0 5.0 35 45
Size in
Inches		 Lbs.
Per Ft.
 .051 .0024
 .064 .0038
 .081 .0061
 .091 .0076
 
Size in
Inches		 Lbs.
Per Ft.
 .102 .0096
 .125 .0144
 .187 .0323
 .187 .0323
 
 
1 Disclaimer: All technical data throughout this site is given only as an indication of what may be expected and should under no circumstances be used in specifying the raw materials. The technical data throughout this site has been obtained from a variety of sources we believe to be accurate, but is NOT GUARANTEED. A & C Metals – Sawing, Inc. assumes no liability whatsoever for the use of or reliance upon this information.
  ©   A & C Metals - Sawing, Inc. — All Rights Reserved. | Terms and Conditions | Privacy Policy