A & C Metals Logo
 
beams, channels, angles, tees & rails
 
   
STEEL ANGLES
Bar Size*
 Top
ASTM A 36     ASME SA-36
ASTM A 709 Grade 36
Standard Lengths: 20, 40 Ft. Random
 Chemical Composition1     Mechanical Properties1
CHEMICAL COMPOSITION:
ASTM A 36 Chemical Composition
ASTM/AISI
Grade		 UNS
Number		 C
Max		 Mn P
Max		 S
Max		 Si
Max
ASTM A 36 — .26 — .04 .05 .40
MECHANICAL PROPERTIES:
ASTM A 36 Mechanical Properties
Condition of Steel Tensile,
(ksi)dagger		 Yield point, min, (ksi)dagger Elongation
in 8", min, %		 Elongation
in 2", min, %
All Shapes 58-80 36 20dagger 21
Horizontal Linedagger 1 Ksi = 1000 psi
dagger For material under 5/16" in thickness or diameter, % Elongation in 8 inches is reduced by
   1.25% for each decrease of 1/32" below 5/16" in thickness or diameter.
Size in
Inches		 Thickness
t		 Lbs.
Per Ft.		 Est. Lbs.
20 Ft		 Est. Lbs.
40 Ft
L    1/2 x    1/2 x 1/8   .38     7.60  
L    5/8 x    5/8 x 1/8   .48     9.60  
L    3/4 x    3/4 x 1/8   .59   11.80  
L    7/8 x    7/8 x 1/8   .70   14.00  
L 1" x    5/8 x 1/8   .64   12.80  
L 1" x    3/4 x 1/8   .70   14.00  
L 1" x 1" x 1/8   .80   16.00   32.00
           3/16 1.16    23.20  
          1/4  1.49    29.80  
L 1-1/4 x 1-1/4 x 1/8  1.01    20.20   40.40
           3/16 1.48    29.60   59.20
          1/4  1.92    38.40   76.80
L 1-3/8 x    7/8 x 1/8   .91   18.20  
           3/16 1.32    26.40  
L 1-1/2 x 1-1/4 x  3/16 1.65    33.00  
L 1-1/2 x 1-1/2 x 1/8  1.23    24.60   49.20
           3/16 1.80    36.00   72.00
          1/4  2.34    46.80   93.60
L 1-3/4 x 1-1/4 x 1/8  1.23    24.60  
           3/16 1.80    36.00  
          1/4  2.34    46.80  
L 1-3/4 x 1-3/4 x 1/8  1.44    28.80   57.60
           3/16 2.12    42.40   84.80
          1/4  2.77    55.40 110.8  
L 2" x 1-1/4 x  3/16 1.96    39.20  
          1/4  2.55    51.00  
L 2" x 1-1/2 x 1/8  1.44    28.80  
           3/16 2.12    42.40   84.80
          1/4  2.77    55.40 110.8  
L 2" x 2" x 1/8  1.65    33.00   66.00
           3/16 2.44    48.80   97.60
          1/4  3.19    63.80 127.6  
           5/16 3.92    78.40 156.8  
          3/8  4.70    94.00 188.0  
L 2-1/2 x 1-1/2 x  3/16 2.44    48.80   97.60
          1/4  3.19    63.80 127.6  
           5/16 3.92    78.40  
L 2-1/2 x 2" x  3/16 2.75    55.00 110.0  
          1/4  3.62    72.40 144.8  
           5/16 4.50    90.00 180.0  
          3/8  5.30  106.0    
L 2-1/2 x 2-1/2 x  3/16 3.07    61.40 122.8  
          1/4  4.10    82.00 164.0  
           5/16 5.00  100.0   200.0  
          3/8  5.90  118.0   236.0  
          1/2  7.70  154.0   308.0  
*Also available Pickled Dry or Oiled, Mechanically Descaled Dry or Oiled, or Galvanized
     
   
STEEL ANGLES
“L” SHAPES*
 Top
ASTM A 36     ASME SA-36
ASTM A 709 Grade 36
 Chemical Composition1     Mechanical Properties1
CHEMICAL COMPOSITION:
ASTM A 36 Chemical Composition
ASTM/AISI
Grade		 UNS
Number		 C
Max		 Mn P
Max		 S
Max		 Si
Max
ASTM A 36 — .26 — .04 .05 .40
MECHANICAL PROPERTIES:
ASTM A 36 Mechanical Properties
Condition of Steel Tensile,
(ksi)dagger		 Yield point, min, (ksi)dagger Elongation
in 8", min, %		 Elongation
in 2", min, %
All Shapes 58-80 36 20dagger 21
Horizontal Linedagger 1 Ksi = 1000 psi
dagger For material under 5/16" in thickness or diameter, % Elongation in 8 inches is reduced by
   1.25% for each decrease of 1/32" below 5/16" in thickness or diameter.
Size in
Inches		 Thickness
t		 Lbs.
Per Ft.
L  3" x  2" x  3/16  3.1
          1/4   4.1
           5/16  5.0
          3/8   5.9
          1/2   7.7
L 3" x 2-1/2 x 1/4   4.5
           5/16  5.6
          3/8   6.6
L 3" x 3" x  3/16  3.7
          1/4   4.9
           5/16  6.1
          3/8   7.2
          1/2   9.4
L 3-1/2 x 2-1/2 x 1/4   4.9
           5/16  6.1
          3/8   7.2
          1/2   9.4
L 3-1/2 x 3" x 1/4   5.4
           5/16  6.6
          3/8   7.9
          1/2  10.2 
L 3-1/2 x 3-1/2 x 1/4   5.8
           5/16  7.2
          3/8   8.5
          1/2  11.1 
L 4" x 3" x 1/4   5.8
           5/16  7.2
          3/8   8.5
          1/2  11.1 
L 4" x 3-1/2 x 1/4   6.2
           5/16  7.7
          3/8   9.1
          1/2  11.9 
L 4" x 4" x 1/4   6.6
           5/16  8.2
          3/8   9.8
          1/2  12.8 
          5/8  15.7 
          3/4  18.5 
             
             
             
 
Size in
Inches		 Thickness
t		 Lbs.
Per Ft.
L 5" x 3" x 1/4   6.6
           5/16  8.2
          3/8   9.8
          1/2  12.8 
L 5" x 3-1/2 x 1/4   7.0
           5/16  8.7
          3/8  10.4 
          1/2  13.6 
          5/8  16.8 
          3/4  19.8 
L 5" x 5" x  5/16 10.3 
          3/8  12.3 
          1/2  16.2 
          5/8  20.0 
          3/4  23.6 
L 6" x 3-1/2 x  5/16  9.8
          3/8  11.7 
          1/2  15.3 
L 6" x 4" x  5/16 10.3 
          3/8  12.3 
          1/2  16.2 
          5/8  20.0 
          3/4  23.6 
L 6" x 6" x 3/8  14.9 
          1/2  19.6 
          5/8  24.2 
          3/4  28.7 
          7/8  33.1 
          1"        37.4 
L 7" x 4" x 3/8  13.6 
          1/2  17.9 
          5/8  22.1 
          3/4  26.2 
L 8" x 4" x 1/2  19.6 
          3/4  28.7 
L 8" x 6" x 1/2  23.0 
          3/4  33.8 
          1"        44.2 
L 8" x 8" x 1/2  26.4 
          5/8  32.7 
          3/4  38.9 
          1"        51.0 
*Also available Pickled Dry or Oiled, Mechanically Descaled Dry or Oiled, or Galvanized
     
   
STEEL SHAPES
HIGH STRENGTH LOW ALLOY
ANGLES
 Top
ASTM A 588
ASTM A 709 Grade 50W
Standard Lengths:
Bar Angles 20 Ft. Random,
“ L” Angles (Structural) 20, 40 Ft. Random
 Chemical Composition1     Mechanical Properties1
CHEMICAL COMPOSITION:
HIGH STRENGTH LOW ALLOY ASTM A 588
C Mn P S Si Cu Ni Cr Mo Sn Other
.20 .75/
1.35		 .04 .05 .15/
.65		 .20/
.04		 .50
max		 .40/
.70		     V .01/.10
MECHANICAL PROPERTIES:
HIGH STRENGTH LOW ALLOY ASTM A 588
Condition
of Steel 		Tensile
(ksi)dagger		 Yield
(ksi)dagger		 Elongation"'
in 8", min, %		 Elongation"'
in 2", min, %		 Typical
Rockwell
Hardness
Shapes 70 50 18 21 B93
Horizontal Line  dagger 1 Ksi = 1000 psi
  dagger Adjustments required for thicknesses under 5/16“ and over 3-1/2“
Size in
Inches		 Thickness
t		 Lbs.
Per Ft.
  1-1/2 x 1-1/2 x  3/16  1.80
L 3" x 3" x 3/8  7.2 
L 3-1/2 x 3-1/2 x 3/8  8.5 
 
 
1 Disclaimer: All technical data throughout this site is given only as an indication of what may be expected and should under no circumstances be used in specifying the raw materials. The technical data throughout this site has been obtained from a variety of sources we believe to be accurate, but is NOT GUARANTEED. A & C Metals - Sawing, Inc. assumes no liability whatsoever for the use of or reliance upon this information.
  ©   A & C Metals - Sawing, Inc. — All Rights Reserved. | Terms and Conditions | Privacy Policy