A & C Metals Logo
 
beams, channels, angles, tees & rails
 
   
STEEL TEES
Bar Size
 Top
ASTM A 36     ASME SA-36
ASTM A 709 Grade 36
Standard Lengths 20 Ft. Random
 Chemical Composition1     Mechanical Properties1
CHEMICAL COMPOSITION:
ASTM A 36 Chemical Composition
ASTM/AISI
Grade		 UNS
Number		 C
Max		 Mn P
Max		 S
Max		 Si
Max
ASTM A 36 — .26 — .04 .05 .40
MECHANICAL PROPERTIES:
ASTM A 36 Mechanical Properties
Condition of Steel Tensile,
(ksi)dagger		 Yield point, min, (ksi)dagger Elongation
in 8", min, %		 Elongation
in 2", min, %
All Shapes 58-80 36 20dagger 21
Horizontal Linedagger 1 Ksi = 1000 psi
dagger For material under 5/16" in thickness or diameter, % Elongation in 8 inches is reduced by
   1.25% for each decrease of 1/32" below 5/16" in thickness or diameter.
Flange
Inches
b		 Stem
Inches
d		 Thickness
Inches
t		 Lbs.
Per Ft.		 Est. Lbs.
Per 20 Ft.
1-1/2 1-1/2  3/16 1.80 36.00
1-1/2 1-1/2 1/4  2.43 48.60
2       2       1/4  3.62 72.40
2-1/2 2-1/2 1/4  4.60 92.00
 
 
1 Disclaimer: All technical data throughout this site is given only as an indication of what may be expected and should under no circumstances be used in specifying the raw materials. The technical data throughout this site has been obtained from a variety of sources we believe to be accurate, but is NOT GUARANTEED. A & C Metals - Sawing, Inc. assumes no liability whatsoever for the use of or reliance upon this information.
  ©   A & C Metals - Sawing, Inc. — All Rights Reserved. | Terms and Conditions | Privacy Policy