A & C Metals Logo
 
hot rolled bars
 
   
STEEL HALF OVALS
HOT ROLLED
ASTM A 36 ASME SA-36
 Top
ASTM A 709 Grade 36
Standard Lengths: 20 Ft. Random
 Chemical Composition1     Mechanical Properties1
CHEMICAL COMPOSITION:
WE INTEND TO ADD CHEMICAL DATA FOR THIS ITEM SOON
MECHANICAL PROPERTIES:
WE INTEND TO ADD MECHANICAL DATA FOR THIS ITEM SOON
Size in
Inches		 Lbs.
Per Ft.		 Est. Lbs.
Per 20' Bar
1"     x  1/4   .620 12.40
1-1/4 x  5/16   .960 19.20
1-1/2 x  5/16 1.180 23.60
 
Size in
Inches		 Lbs.
Per Ft.		 Est. Lbs.
Per 20' Bar
1-1/2 x  7/16 1.560 31.20
1-3/4 x  7/16 1.910 38.20
2"     x  1/2 2.587 51.74
     
   
STEEL HALF ROUNDS
HOT ROLLED
ASTM A 36 ASME SA-36
 Top
ASTM A 709 Grade 36
Standard Lengths: 20 Ft. Random
 Chemical Composition1     Mechanical Properties1
CHEMICAL COMPOSITION:
WE INTEND TO ADD CHEMICAL DATA FOR THIS ITEM SOON
MECHANICAL PROPERTIES:
WE INTEND TO ADD MECHANICAL DATA FOR THIS ITEM SOON
Size in
Inches		 Lbs.
Per Ft.		 Est. Lbs.
Per 20' Bar
   3/4 .7510 15.02
 
Size in
Inches		 Lbs.
Per Ft.		 Est. Lbs.
Per 20' Bar
1" 1.335 26.70
     
   
STEEL
CONCRETE REINFORCING
BARS
 Top
New Billet Steel — Deformed Bars
ASTM A 615 Grade 60
Tensile Strength 90 ksi Minimum
Yield Point 60 ksi Minimum
 Chemical Composition1     Mechanical Properties1
CHEMICAL COMPOSITION:
WE INTEND TO ADD CHEMICAL DATA FOR THIS ITEM SOON
MECHANICAL PROPERTIES:
WE INTEND TO ADD MECHANICAL DATA FOR THIS ITEM SOON
Bar
No.*		 Lbs.
PerFoot		 Nominal Dimensions
Dia.
Inches		 Area
Sq. Inches		 Perimeter
Inches
4   .6676 .500 .20 1.571
5 1.043   .625 .31 1.963
6 1.502   .750 .44 2.356
*Bar number is the number of eighths of an inch in the nominal diameter
 
 
1 Disclaimer: All technical data throughout this site is given only as an indication of what may be expected and should under no circumstances be used in specifying the raw materials. The technical data throughout this site has been obtained from a variety of sources we believe to be accurate, but is NOT GUARANTEED. A & C Metals - Sawing, Inc. assumes no liability whatsoever for the use of or reliance upon this information.
  ©   A & C Metals - Sawing, Inc. — All Rights Reserved. | Terms and Conditions | Privacy Policy