A & C Metals Logo
 
steel sheet coil strapping
 
   
STEEL SHEET
HOT ROLLED
 Top
ASTM A 1011 CS Type B (.10 max. carbon)
Commercial Steel, Dry
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
14 Ga. (.0747) 3.125 # Sq. Ft.
36 x   96     75.00
36 x 120     93.75
36 x 144 112.5
48 x   96 100.0
48 x 120 125.0
48 x 144 150.0
60 x   96 125.0
60 x 120 156.3
60 x 144 187.5
12 Ga. (.1046) 4.375 # Sq. Ft.
36 x   96 105.0
36 x 120 131.3
36 x 144 157.5
48 x   96 140.0
48 x 120 175.0
48 x 144 210.0
60 x   96 175.0
60 x 120 218.8
60 x 144 262.5
72 x   96 210.0
72 x 120 262.5
72 x 144 315.0
84 x 240 639.2
11 Ga. (.1196) 5.000 # Sq. Ft.
36 x   96 120.0
36 x 120 150.0
48 x   96 160.0
48 x 120 200.0
48 x 144 240.0
60 x   96 200.0
60 x 120 250.0
60 x 144 300.0
72 x   96 240.0
72 x 120 300.0
72 x 144 360.0
96 x 240 835.3
 
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
10 Ga. (.1345) 5.625 # Sq. Ft.
36 x   96 135.0
36 x 120 168.8
36 x 144 202.5
48 x   96 180.0
48 x 120 225.0
48 x 144 270.0
60 x   96 225.0
60 x 120 281.3
60 x 144 337.5
72 x   96 270.0
72 x 120 337.5
72 x 144 405.0
72 x 240 675.0
84 x 240 822.0
96 x 240 939.4
9 Ga. (.1495) 6.25 # Sq. Ft.
48 x 120 250.0
8 Ga. (.1644) 6.875 # Sq. Ft.
48 x   96 220.0
48 x 120 275.0
60 x   96 275.0
60 x 120 343.8
7 Ga. (.1793) 7.500 # Sq. Ft.
36 x   96 180.0
36 x 120 225.0
36 x 144 270.0
48 x   96 240.0
48 x 120 300.0
48 x 144 360.0
60 x   96 300.0
60 x 120 375.0
60 x 144 450.0
72 x   96 360.0
72 x 120 450.0
72 x 144 540.0
       
     
   
STEEL SHEET
HOT ROLLED
PICKLED AND OILED
 Top
ASTM A 1011 CS Type B (.10 max. carbon)
Commercial Steel
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
16 Ga. (.0598) 2.500 # Sq. Ft.
48 x 120 100.0
14 Ga. (.0747) 3.125 # Sq. Ft.
36 x   96     75.00
36 x 120     93.75
36 x 144 112.5
48 x   96 100.0
48 x 120 125.0
48 x 144 150.0
60 x   96 125.0
60 x 120 156.3
60 x 144 187.5
13 Ga. (.0897) 3.750 # Sq. Ft.
36 x   96     90.00
36 x 120 112.5
48 x   96 120.0
48 x 120 150.0
60 x 120 187.5
12 Ga. (.1046) 4.375 # Sq. Ft.
36 x   96 105.0
36 x 120 131.3
48 x   96 140.0
48 x 120 175.0
48 x 144 210.0
60 x   96 175.0
60 x 120 218.8
60 x 144 262.5
72 x   96 210.0
72 x 120 262.5
72 x 144 315.0
11 Ga. (.1196) 5.000 # Sq. Ft.
36 x   96 120.0
36 x 120 150.0
48 x   96 160.0
48 x 120 200.0
48 x 144 240.0
60 x   96 200.0
60 x 120 250.0
60 x 144 300.0
 
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
11 Ga. (.1196) 5.000 # Sq. Ft.
72 x   96 240.0
72 x 120 300.0
72 x 144 360.0
10 Ga. (.1345) 5.625 # Sq. Ft.
36 x   96 135.0
36 x 120 168.8
48 x   96 180.0
48 x 120 225.0
48 x 144 270.0
60 x   96 225.0
60 x 120 281.3
60 x 144 337.5
72 x   96 270.0
72 x 120 337.5
72 x 144 405.0
9 Ga. (.1495) 6.25 # Sq. Ft.
48 x   96 200.0
48 x 120 250.0
8 Ga. (.1644) 6.875 # Sq. Ft.
48 x   96 220.0
48 x 120 275.0
7 Ga. (.1793) 7.500 # Sq. Ft.
36 x   96 180.0
36 x 120 225.0
36 x 144 270.0
48 x   96 240.0
48 x 120 300.0
48 x 144 360.0
60 x   96 300.0
60 x 120 375.0
60 x 144 450.0
72 x   96 360.0
72 x 120 450.0
72 x 144 540.0
6 Ga. (.1943) 8.125 # Sq. Ft.
48 x   96 260.0
48 x 120 325.0
       
     
   
STEEL SHEET
AISI/SAE 1050
HOT ROLLED, DRY
 Top
 
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
12 Ga. (.1046) 4.375 # Sq. Ft.
40 x 120 149.5
11 Ga. (.1196) 5.000 # Sq. Ft.
40 x 120 166.7
 
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
10 Ga. (.1345) 5.625 # Sq. Ft.
40 x 120 187.5
7 Ga. (.1793) 7.500 # Sq. Ft.
40 x 120 250.0
     
   
STEEL SHEET
HIGH STRENGTH LOW ALLOY
 Top
COR-TEN® A or ASTM A 606 Type 4
EX-TEN® H50 or ASTM A 1011 HSLAS* Gr. 50 Class 1
 Chemical Composition1     Mechanical Properties1
CHEMICAL COMPOSITION:
WE INTEND TO ADD CHEMICAL DATA FOR THIS ITEM SOON
MECHANICAL PROPERTIES:
WE INTEND TO ADD MECHANICAL DATA FOR THIS ITEM SOON
Gage & Size
in Inches		 Est. Lbs.
Per Sheet		 Cor-Ten Ex-Ten
18 Ga. (.0478) 2.000 # Sq. Ft.
48 x 144     96.00   X**  
16 Ga. (.0598) 2.500 # Sq. Ft.
48 x 144 120.0   X**  
14 Ga. (.0747) 3.125 # Sq. Ft.
48 x 120 125.0 X X
48 x 144 150.0 X  
12 Ga. (.1046) 4.375 # Sq. Ft.
48 x   96 140.0   X
48 x 120 175.0 X X
48 x 144 210.0 X  
60 x   96 175.0   X
60 x 120 218.8 X X
11 Ga. (.1196) 5.000 # Sq. Ft.
48 x 120 200.0 X X
48 x 144 240.0 X  
10 Ga. (.1345) 5.625 # Sq. Ft.
48 x   96 180.0 X  
48 x 120 225.0 X X
48 x 144 270.0 X  
60 x 120 281.3 X X
60 x 144 337.5 X X
8 Ga. (.1644) 6.875 # Sq. Ft.
48 x 144 330.0 X  
7 Ga. (.1793) 7.500 # Sq. Ft.
48 x   96 240.0 X X
48 x 120 300.0 X X
For High Strength Plates, click here
  *HSLAS - High Strength Low Alloy Steel
**Cold Rolled only
     
   
STEEL SHEET
HOT ROLLED
CS SCS® *†
 Top
The SCS process cleans as-rolled (HR) material to produce an extremely clean surface, which approximates a cold rolled finish that also resists rust without oil or preservatives.
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
12 Ga. (.1046) 4.375 # Sq. Ft.
48 x 120 175.0
60 x 120 218.8
11 Ga. (.1196) 5.000 # Sq. Ft.
48 x 120 200.0
60 x 120 250.0
 
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
10 Ga. (.1345) 5.625 # Sq. Ft.
48 x 120 225.0
60 x 120 281.3
7 Ga. (.1793) 7.500 # Sq. Ft.
48 x 120 300.0
60 x 120 375.0
For SCS Plates, click here
* Other sizes and grades are available upon request
†A patented process of The Material Works, Ltd.
     
   
STEEL SHEET
COLD ROLLED
 Top
ASTM A 1008 CS Type B
Commercial Steel, Oiled
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
48 x 120 30.00
24 Ga. (.0239) 1.000 # Sq. Ft.
36 x   96 24.00
36 x 120 30.00
48 x   96 32.00
48 x 120 40.00
22 Ga. (.0299) 1.250 # Sq. Ft.
36 x   96 30.00
36 x 120 37.50
48 x   96 40.00
48 x 120 50.00
48 x 144 60.00
20 Ga. (.0359) 1.500 # Sq. Ft.
36 x   96 36.00
36 x 120 45.00
36 x 144 54.00
48 x   96 48.00
48 x 120 60.00
48 x 144 72.00
60 x   96 60.00
60 x 120 75.00
60 x 144 90.00
19 Ga. (.0418) 1.750 # Sq. Ft.
36 x   96 42.00
48 x   96 56.00
48 x 120 70.00
18 Ga. (.0478) 2.000 # Sq. Ft.
36 x   96 48.00
36 x 120 60.00
36 x 144 72.00
42 x 120 70.00
48 x   96 64.00
48 x 120 80.00
48 x 144 96.00
60 x   96 80.00
60 x 120 100.0    
16 Ga. (.0598) 2.500 # Sq. Ft.
36 x   96 60.00
36 x 120 75.00
36 x 144 90.00
48 x   96 80.00
48 x 120 100.0    
48 x 144 120.0    
       
       
 
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
16 Ga. (.0598) 2.500 # Sq. Ft.
60 x   96 100.0
60 x 120 125.0
60 x 144 150.0
72 x 120 150.0
72 x 144 180.0
14 Ga. (.0747) 3.125 # Sq. Ft.
36 x   96     75.00
36 x 120     93.75
42 x 120 109.4
48 x   96 100.0
48 x 120 125.0
48 x 144 150.0
60 x   96 125.0
60 x 120 156.3
60 x 144 187.5
72 x 120 187.5
72 x 144 225.0
13 Ga. (.0897) 3.750 # Sq. Ft.
36 x   96     90.00
36 x 120 112.5
48 x   96 120.0
48 x 120 150.0
48 x 144 180.0
12 Ga. (.1046) 4.375 # Sq. Ft.
36 x   96 105.0
36 x 120 131.3
48 x   96 140.0
48 x 120 175.0
48 x 144 210.0
60 x   96 175.0
60 x 120 218.8
60 x 144 262.5
11 Ga. (.1196) 5.000 # Sq. Ft.
36 x   96 120.0
36 x 120 150.0
48 x   96 160.0
48 x 120 200.0
48 x 144 240.0
60 x 120 250.0
10 Ga. (.1345) 5.625 # Sq. Ft.
36 x   96 135.0
36 x 120 168.8
48 x   96 180.0
48 x 120 225.0
     
   
STEEL SHEET
COLD ROLLED
 Top
ASTM A 1008 DS Type B
Drawing Steel Aluminum Killed
Non-Age Hardening, Oiled
Intended for difficult drawing, spinning, and forming operations.
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
24 Ga. (.0239) 1.000 # Sq. Ft.
48 x 120     40.00
22 Ga. (.0299) 1.250 # Sq. Ft.
48 x   96     40.00
48 x 120     50.00
20 Ga. (.0359) 1.500 # Sq. Ft.
36 x   96     36.00
36 x 120     45.00
48 x   96     48.00
48 x 120     60.00
19 Ga. (.0418) 1.750 # Sq. Ft.
48 x   96     56.00
48 x 120     70.00
18 Ga. (.0478) 2.000 # Sq. Ft.
36 x   96     48.00
36 x 120      60.00
48 x   96     64.00
48 x 120     80.00
16 Ga. (.0598) 2.500 # Sq. Ft.
36 x   96     60.00
36 x 120     75.00
       
 
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
16 Ga. (.0598) 2.500 # Sq. Ft.
48 x   96     80.00
48 x 120 100.0
48 x 144 120.0
14 Ga. (.0747) 3.125 # Sq. Ft.
36 x   96     75.00
36 x 120     93.75
48 x   96 100.0
48 x 120 125.0
48 x 144 150.0
13 Ga. (.0897) 3.750 # Sq. Ft.
48 x   96 120.0
48 x 120 150.0
12 Ga. (.1046) 4.375 # Sq. Ft.
48 x   96 140.0
48 x 120 175.0
11 Ga. (.1196) 5.000 # Sq. Ft.
36 x 120 150.0
48 x 120 200.0
10 Ga. (.1345) 5.625 # Sq. Ft.
36 x 120 168.8
48 x 120 225.0
 
 
1 Disclaimer: All technical data throughout this site is given only as an indication of what may be expected and should under no circumstances be used in specifying the raw materials. The technical data throughout this site has been obtained from a variety of sources we believe to be accurate, but is NOT GUARANTEED. A & C Metals - Sawing, Inc. assumes no liability whatsoever for the use of or reliance upon this information.
  ©   A & C Metals - Sawing, Inc. — All Rights Reserved. | Terms and Conditions | Privacy Policy