A & C Metals Logo
 
steel sheet coil strapping
 
   
STEEL SHEET AND COIL
GALVANIZED
ASTM A 653 CS Type B G90
 Top

""
Surface Chem. Treated
G90 Coating* Minimum Spangle
Commercial Steel
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
26 Ga. (.0217) .906 # Sq. Ft.
48 x Coil  
48 x   96 28.99
48 x 120 36.24
60 x Coil  
60 x 120 45.30
24 Ga. (.0276) 1.156 # Sq. Ft.
36 x Coil  
36 x   96 27.74
36 x 120 34.68
48 x Coil  
48 x   96 36.99
48 x 120 46.24
48 x 144 55.49
60 x Coil  
60 x 120 57.80
22 Ga. (.0336) 1.406 # Sq. Ft.
36 x Coil  
36 x   96 33.74
36 x 120 42.18
48 x Coil  
48 x   96 44.99
48 x 120 56.24
60 x Coil  
60 x 120 70.30
20 Ga. (.0396) 1.656 # Sq. Ft.
36 x Coil  
36 x   96 39.74
36 x 120 49.68
48 x Coil  
48 x   96 52.99
48 x 120 66.24
48 x 144 79.49
60 x Coil  
60 x 120 82.80
18 Ga. (.0516) 2.156 # Sq. Ft.
36 x Coil  
36 x   96 51.74
36 x 120 64.68
48 x Coil  
48 x   96 68.99
48 x 120 86.24
48 x 144 103.5    
60 x Coil  
60 x 120 107.8    
60 x 144 129.4    
       
       
       
       
       
 
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
16 Ga. (.0635) 2.656 # Sq. Ft.
36 x Coil  
36 x   96     63.74
36 x 120     79.68
36 x 144     95.60
48 x Coil  
48 x   96     84.99
48 x 120 106.2
48 x 144 127.5
60 x Coil  
60 x 120 132.8
14 Ga. (.0785) 3.281 # Sq. Ft.
36 x Coil  
36 x   96     78.74
36 x 120     98.43
36 x 144 118.1
48 x Coil  
48 x   96 105.0
48 x 120 131.2
48 x 144 157.5
60 x Coil  
60 x 120 164.1
12 Ga. (.1084) 4.531 # Sq. Ft.
36 x Coil  
36 x   96 108.7
36 x 120 135.9
48 x Coil  
48 x   96 145.0
48 x 120 181.2
48 x 144 217.5
60 x Coil  
60 x 120 226.6
60 x 144 271.9
11 Ga. (.1233) 5.156 # Sq. Ft.
48 x Coil  
48 x   96 165.0
48 x 120 206.2
48 x 144 247.5
60 x Coil  
10 Ga. (.1382) 5.781 # Sq. Ft.
36 x Coil  
36 x   96 138.7
36 x 120 173.4
48 x Coil  
48 x   96 185.0
48 x 120 231.2
48 x 144 277.5
60 x 120 289.1
8 Ga. (.1681) 7.031 # Sq. Ft.
48 x 120 281.2
48 x 144 337.5
     
   
""
STEEL SHEET AND COIL
GALVANNEALED
ASTM A 653 CS Type B A60
 Top

""
A60 Coating*
Commercial Steel
A zinc-coated sheet which has been annealed after coating. In this way the spelter is fused to the base metal, and the result is a zinc coating which cannot be flaked or peeled in forming. The surface is readily painted without preliminary treating.
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
24 Ga. (.0276) 1.156 # Sq. Ft.
48 x Coil  
48 x   96 36.99
48 x 120 46.24
22 Ga. (.0336) 1.406 # Sq. Ft.
48 x Coil  
48 x   96 44.99
48 x 120 56.24
48 x 144 67.49
20 Ga. (.0396) 1.656 # Sq. Ft.
36 x Coil  
36 x   96 39.74
36 x 120 49.68
48 x Coil  
48 x   96 52.99
48 x 120 66.24
48 x 144 79.49
18 Ga. (.0516) 2.156 # Sq. Ft.
36 x Coil  
36 x   96 51.74
36 x 120 64.68
36 x 144 77.62
48 x Coil  
48 x   96 68.99
48 x 120 86.24
48 x 144 103.5    
60 x Coil  
60 x   96 86.24
60 x 120 107.8    
       
 
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
16 Ga. (.0635) 2.656 # Sq. Ft.
36 x Coil  
36 x   96     63.74
36 x 120     79.68
48 x Coil  
48 x   96     84.99
48 x 120 106.2
48 x 144 127.5
60 x Coil  
60 x 120 132.8
60 x 144 159.4
14 Ga. (.0785) 3.281 # Sq. Ft.
36 x Coil  
36 x 120     98.43
48 x Coil  
48 x   96 105.0
48 x 120 131.2
60 x Coil  
60 x 120 164.1
60 x 144 196.9
12 Ga. (.1084) 4.531 # Sq. Ft.
48 x Coil  
48 x   96 145.0
48 x 120 181.2
60 x Coil  
60 x 120 226.6
60 x 144 271.9
11 Ga. (.1233) 5.156 # Sq. Ft.
48 x Coil  
48 x 120 206.2
*UL® (Underwriters Laboratories Inc.) approval available
     
   
""
STEEL SHEET AND COIL
ELECTRO-GALVANIZED
PAINTLOK® OR ASTM A 591
 Top

""
Phosphate Treated, Dry
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
26 Ga. (.0179) .750 # Sq. Ft.
48 x Coil  
48 x   96 24.00
48 x 120 30.00
24 Ga. (.0239) 1.000 # Sq. Ft.
48 x Coil  
48 x   96 32.00
48 x 120 40.00
22 Ga. (.0299) 1.250 # Sq. Ft.
36 x Coil  
36 x   96 30.00
36 x 120 37.50
48 x Coil  
48 x   96 40.00
48 x 120 50.00
48 x 144 60.00
20 Ga. (.0359) 1.500 # Sq. Ft.
36 x Coil  
36 x   96 36.00
36 x 120 45.00
48 x Coil  
48 x   96 48.00
48 x 120 60.00
 
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
18 Ga. (.0478) 2.000 # Sq. Ft.
36 x Coil  
36 x   96   48.00
36 x 120   60.00
48 x Coil  
48 x   96   64.00
48 x 120   80.00
16 Ga. (.0598) 2.500 # Sq. Ft.
36 x Coil  
36 x   96   60.00
36 x 120   75.00
48 x Coil  
48 x   96   80.00
48 x 120 100.0  
48 x 144 120.0  
14 Ga. (.0747) 3.125 # Sq. Ft.
36 x Coil  
36 x   96   75.00
36 x 120   93.75
48 x Coil  
48 x   96 100.0  
48 x 120 125.0  
       
     
   
""
STEEL SHEET AND COIL
PAINTGRIP GALVANIZED
ASTM A 653 CS Type B G90
 Top

""
Minimum Spangle, Dry
G90 Coating* Commercial Steel
        The surface has a full zinc coating and is phosphate treated for painting.
        Recommended for forming.
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
26 Ga. (.0217) .906 # Sq. Ft.
36 x   96 21.74
36 x 120 27.18
24 Ga. (.0276) 1.156 # Sq. Ft.
48 x Coil  
48 x   96 36.99
48 x 120 46.24
22 Ga. (.0336) 1.406 # Sq. Ft.
48 x Coil  
48 x 120 56.24
20 Ga. (.0396) 1.656 # Sq. Ft.
48 x Coil  
48 x   96 52.99
48 x 120 66.24
       
 
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
18 Ga. (.0516) 2.156 # Sq. Ft.
48 x Coil  
48 x   96   68.99
48 x 120   86.24
16 Ga. (.0635) 2.656 # Sq. Ft.
36 x Coil  
36 x   96   63.74
36 x 120   79.68
48 x Coil  
48 x   96   84.99
48 x 120 106.2  
14 Ga. (.0785) 3.281 # Sq. Ft.
48 x Coil  
48 x   96 105.0  
48 x 120 131.2  
*UL® (Underwriters Laboratories Inc.) approval available
     
   
""
STEEL SHEET AND COIL
ALUMINIZED
ASTM A 463 Type 1
 Top

""
Coating T1-40, Oiled
Aluminized Steel is sheet steel coated with aluminum by a patented hotdip process. The finished product, coated on both sides, combines the surface characteristics of aluminum with the mechanical properties of steel.
Type # 1 – Aluminum-silicon alloy coating used for its high heat reflectivity and resistance to a combination of heat and corrosion.
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
22 Ga. (.0336) 1.363 # Sq. Ft.
36 x Coil  
36 x   96 32.72
36 x 120 40.89
48 x Coil  
48 x   96 43.62
48 x 120 54.52
20 Ga. (.0396) 1.613 # Sq. Ft.
36 x Coil  
36 x   96 38.71
36 x 120 48.39
48 x Coil  
48 x   96 51.62
48 x 120 64.52
60 x Coil  
60 x 120 80.65
60 x 144 96.78
18 Ga. (.0516) 2.113 # Sq. Ft.
30 x Coil  
30 x 120 52.83
36 x Coil  
36 x   96 50.71
36 x 120 63.39
48 x Coil 67.62
48 x   96  
48 x 120 84.52
       
       
 
Gage & Size
in Inches		 Est. Lbs.
Per Sheet
18 Ga. (.0516) 2.113 # Sq. Ft.
60 x Coil  
60 x 120 105.65
60 x 144 126.8  
16 Ga. (.0635) 2.613 # Sq. Ft.
36 x Coil  
36 x   96   62.71
36 x 120   78.39
48 x Coil  
48 x   96   83.62
48 x 120 104.5  
60 x Coil  
60 x 120 130.7  
60 x 144 156.8  
14 Ga. (.0785) 3.238 # Sq. Ft.
48 x Coil  
48 x 120 129.5  
48 x 144 155.4  
60 x Coil  
60 x 120 161.9  
12 Ga. (.1084) 4.488 # Sq. Ft.
48 x Coil  
48 x   96 143.6  
48 x 120 179.5  
48 x 144 215.4  
60 x Coil  
60 x 120 224.4  
60 x 144 269.3  
     
   
""
SPRING STEEL SHEET AND COIL
COLD ROLLED ANNEALED
SAE 1074    ASTM A 684
 Top

""
SOFT ANNEALED
Can be easily formed and subsequently heat treated by quenching in water from 1450°–1500°F and tempering to the desired hardness.
Size in
Inches		 Est. Lbs.
Per Foot		 Stock
Lengths
in Ft.
.020 x 23-15/16 1.628 8, Coil
.022 x 23-15/16 1.790 8, Coil
.025 x 23-15/16 2.034 8, Coil
.028 x 23-15/16 2.279 8, Coil
.032 x 23-15/16 2.604 8, Coil
.035 x 23-15/16 2.848 8, Coil
.042 x 23-15/16 3.418 8, Coil
 
Size in
Inches		 Est. Lbs.
Per Foot		 Stock
Lengths
in Ft.
.050 x 23-15/16   4.069 8, Coil
.062 x 23-15/16   5.045 8, Coil
.072 x 23-15/16   5.860 8, Coil
.083 x 23-15/16   6.754 8        
.094 x 23-15/16   7.650 8        
.109 x 23-15/16   8.870 8        
.125 x 23-15/16 10.17   8        
     
   
""
SPRING STEEL SHEET AND COIL
COLD ROLLED ANNEALED
SAE 1095    ASTM A 684
 Top

""
SOFT ANNEALED
Can be easily formed and subsequently heat treated by quenching in water from 1400°–1450°F and tempering to the desired hardness.
Size in
Inches		 Est. Lbs.
Per Foot		 Stock
Lengths
in Ft.
.015 x 23-15/16 1.221 10, Coil
.020 x 23-15/16 1.628 10, Coil
.032 x 23-15/16 2.604 10, Coil
.035 x 23-15/16 2.848 10, Coil
.042 x 23-15/16 3.418 10, Coil
 
Size in
Inches		 Est. Lbs.
Per Foot		 Stock
Lengths
in Ft.
.050 x 23-15/16   4.069 10, Coil
.062 x 23-15/16   5.045 10, Coil
.072 x 23-15/16   5.860 10        
.094 x 23-15/16   7.650 10        
.125 x 23-15/16 10.17   10        
 
 
1 Disclaimer: All technical data throughout this site is given only as an indication of what may be expected and should under no circumstances be used in specifying the raw materials. The technical data throughout this site has been obtained from a variety of sources we believe to be accurate, but is NOT GUARANTEED. A & C Metals - Sawing, Inc. assumes no liability whatsoever for the use of or reliance upon this information.
  ©   A & C Metals - Sawing, Inc. — All Rights Reserved. | Terms and Conditions | Privacy Policy