A & C Metals Logo
 
stainless steel
 
   
STAINLESS STEEL PLATES
TYPE 304
 Top
Cold Rolled, Annealed No. 2B Finish
SUITABLE FOR POLISHING
Non-Magnetic*
Paper Interleaved
ASTM A 240     ASME SA-240     ASTM A 666 Anld.
 Chemical Composition1     Mechanical Properties1
CHEMICAL COMPOSITION:
WE INTEND TO ADD CHEMICAL DATA FOR THIS ITEM SOON
MECHANICAL PROPERTIES:
WE INTEND TO ADD MECHANICAL DATA FOR THIS ITEM SOON
     Size in
     Inches		 Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Ft.
3/16 x 48   8.579 34.32
    60   42.90
    72   51.47
1/4 x 48 11.16   44.64
    60   55.80
*May be slightly magnetic when cold worked
     
   
STAINLESS STEEL PLATES
TYPES 304, 304L
 Top
Hot Rolled, Annealed and Pickled
Non-Magnetic*
ASTM A 240 ASME SA-240 ASTM A 666 Anld
 Chemical Composition1     Mechanical Properties1
CHEMICAL COMPOSITION:
WE INTEND TO ADD CHEMICAL DATA FOR THIS ITEM SOON
MECHANICAL PROPERTIES:
WE INTEND TO ADD MECHANICAL DATA FOR THIS ITEM SOON
Size in
Inches		 Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Ft.
   3/16 x 36     8.579 25.74
    48   34.32
    60   42.90
    72   51.47
    96   68.63
   1/4 x 48 11.16 44.64
    60   55.80
    72   66.96
    96   89.28
   5/16 x 48 13.75 55.00
    60   68.75
    72   82.50
    96   110.0    
   3/8 x 48 16.50 66.00
    60   82.50
    72   99.00
    96   132.0    
   1/2 x 48 21.66 86.64
    60   108.3    
    72   130.0    
    96   173.3    
   5/8 x 48 26.83 107.3    
    60   134.1    
    96   214.6    
 
Size in
Inches		 Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Ft.
   3/4 x 48 32.12 128.5
    60   160.6
    96   257.0
   7/8 x 60 37.29 186.4
    96   298.3
1" x 48 42.67 170.7
    60   213.3
    96   341.4
1-1/8 x 60 47.83 239.1
    96   382.6
1-1/4 x 48 53.00 212.0
    60   265.0
    96   424.0
1-1/2 x 48 63.34 253.4
    60   316.7
    96   506.7
1-3/4 x 48 73.67 294.7
    60   368.3
    96   589.4
2" x 60 84.01 420.0
    96   672.1
2-1/2 x 96 105.1     840.8
3" x 96 126.3     1010.4  
         
*May be slightly magnetic when cold worked
     
   
STAINLESS STEEL PLATES
TYPES 316/316L
 Top
Hot Rolled, Annealed and Pickled
Non-Magnetic*
ASTM A 240     ASME SA-240
ASTM A 666 Anld.
 Chemical Composition1     Mechanical Properties1
CHEMICAL COMPOSITION:
WE INTEND TO ADD CHEMICAL DATA FOR THIS ITEM SOON
MECHANICAL PROPERTIES:
WE INTEND TO ADD MECHANICAL DATA FOR THIS ITEM SOON
Size in
Inches		 Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Ft.
   3/16 x 48     8.579 34.32
    60   42.90
    72   51.47
    96   68.63
   1/4 x 48 11.16 44.64
    60   55.80
    72   66.96
    96   89.28
   5/16 x 48 13.75 55.00
    60   68.75
    72   82.50
    96   110.0    
   3/8 x 48 16.50 66.00
    60   82.50
    72   99.00
    96   132.0    
   1/2 x 48 21.66 86.64
    60   108.3    
    72   130.0    
    96   173.3    
 
Size in
Inches		 Lbs. Per
Sq. Ft.		 Est. Lbs.
Per Ft.
   5/8 x 48 26.83 107.3
    60   134.1
    96   214.6
   3/4 x 48 32.12 128.5
    60   160.6
    96   257.0
   7/8 x 60 37.29 186.4
    96   298.3
1" x 48 42.67 170.7
    60   213.3
    96   341.4
1-1/4 x 48 53.00 212.0
    60   265.0
    96   424.0
1-1/2 x 48 63.34 253.4
    60   316.7
    96   506.7
1-3/4 x 48 73.67 294.7
    60   368.3
         
*May be slightly magnetic when cold worked
 
 
1 Disclaimer: All technical data throughout this site is given only as an indication of what may be expected and should under no circumstances be used in specifying the raw materials. The technical data throughout this site has been obtained from a variety of sources we believe to be accurate, but is NOT GUARANTEED. A & C Metals - Sawing, Inc. assumes no liability whatsoever for the use of or reliance upon this information.
  ©   A & C Metals - Sawing, Inc. — All Rights Reserved. | Terms and Conditions | Privacy Policy