A & C Metals Logo
 
stainless steel
 
   
STAINLESS STEEL SQUARES
TYPE 303 Annealed
Cold Finished
 Top
Non-Magnetic*
Optimum Machining
AMS 5640 Type 1, QQ-S-764 Cond. A
ASTM A 582 Cond. A
Standard Lengths: 12 Ft. Random
 Chemical Composition1     Mechanical Properties1
CHEMICAL COMPOSITION:
WE INTEND TO ADD CHEMICAL DATA FOR THIS ITEM SOON
MECHANICAL PROPERTIES:
WE INTEND TO ADD MECHANICAL DATA FOR THIS ITEM SOON
Size in
Inches		 Lbs.
Per Ft.		 Est. Lbs.
Per Bar
   1/8   .1063   1.275
   3/16   .1195   1.434
   1/4   .2125   2.550
   5/16   .3320   3.984
   3/8   .4781   5.737
   7/16   .6508   7.810
   1/2   .8500 10.20  
   9/16 1.076   12.91  
   5/8 1.328   15.94  
 
Size in
Inches		 Lbs.
Per Ft.		 Est. Lbs.
Per Bar
   3/4   1.913   22.96
   7/8   2.603   31.24
1"   3.400   40.80
1-1/8   4.303   51.64
1-1/4   5.313   63.76
1-1/2   7.650   91.80
2" 13.60   163.2  
2-1/2 21.25   255.0  
     
* May be slightly magnetic when cold worked
     
   
STAINLESS STEEL SQUARES
TYPE 304/304L Annealed
Cold Finished
 Top
Non-Magnetic*
ASTM A 276 Cond. A,  ASTM A 479 Cond. A,
QQ-S-763 Cond. A,  ASME SA-479 Cond. A
Standard Lengths: 12 Ft. Random
 Chemical Composition1     Mechanical Properties1
CHEMICAL COMPOSITION:
WE INTEND TO ADD CHEMICAL DATA FOR THIS ITEM SOON
MECHANICAL PROPERTIES:
WE INTEND TO ADD MECHANICAL DATA FOR THIS ITEM SOON
Size in
Inches		 Lbs.
Per Ft.		 Est. Lbs.
Per Bar
   1/4   .2125   2.550
   1/2   .8500 10.20  
   3/4 1.913   22.96  
1" 3.400   40.80  
 
Size in
Inches		 Lbs.
Per Ft.		 Est. Lbs.
Per Bar
1-1/4   5.313   63.76
1-1/2   7.650   91.80
2" 13.60   163.2  
2-1/2 21.25   255.0  
* May be slightly magnetic when cold worked
     
   
STAINLESS STEEL SQUARES
TYPE 416 Annealed
Cold Finished
 Top
Magnetic
Optimum Machining
ASTM A 582 Cond. A,  AMS 5610 Type 2,
QQ-S-764 Cond. A
Standard Lengths: 12 Ft. Random
 Chemical Composition1     Mechanical Properties1
CHEMICAL COMPOSITION:
WE INTEND TO ADD CHEMICAL DATA FOR THIS ITEM SOON
MECHANICAL PROPERTIES:
WE INTEND TO ADD MECHANICAL DATA FOR THIS ITEM SOON
Size in
Inches		 Lbs.
Per Ft.		 Est. Lbs.
Per Bar
   3/16 .1195 1.434
   1/4 .2125 2.550
   7/16 .6508 7.810
 
Size in
Inches		 Lbs.
Per Ft.		 Est. Lbs.
Per Bar
   5/8 1.328 15.94
   3/4 1.913 22.96
1" 3.400 40.80
 
 
1 Disclaimer: All technical data throughout this site is given only as an indication of what may be expected and should under no circumstances be used in specifying the raw materials. The technical data throughout this site has been obtained from a variety of sources we believe to be accurate, but is NOT GUARANTEED. A & C Metals - Sawing, Inc. assumes no liability whatsoever for the use of or reliance upon this information.
  ©   A & C Metals - Sawing, Inc. — All Rights Reserved. | Terms and Conditions | Privacy Policy