Stainless Steel :: Angles :: A & C Metals

STAINLESS STEEL ANGLES
TYPE 304/304L
Annealed and Pickled

Top

Non-Magnetic*
ASTM A 276 Cond. A ASTM A 479 Cond. A
ASME SA-479 Cond. A QQ-S-763 Cond. A
Standard Lengths: 20 Ft. Random

Size in Inches				t	Lbs. Per Ft.	Est. Lbs. Per 20' Bar
3/4	x	3/4	x	1/8	0.59	11.80
1"	x	1"	x	1/8	0.80	16.00
				3/16	1.16	23.20
				1/4	1.49	29.80
1-1/4	x	1-1/4	x	1/8	1.01	20.20
				3/16	1.48	29.60
				1/4	1.92	38.40
1-1/2	x	1-1/2	x	1/8	1.23	24.60
				3/16	1.80	36.00
				1/4	2.34	46.80
2"	x	2"	x	1/8	1.65	33.00

Size in Inches				t	Lbs. Per Ft.	Est. Lbs. Per 20' Bar
2"	x	2"	x	3/16	2.44	48.80
				1/4	3.19	63.80
				3/8	4.70	94.00
2-1/2	x	2-1/2	x	3/16	3.07	61.40
				1/4	4.10	82.00
				3/8	5.90	118.00
3"	x	3"	x	1/4	4.90	98.00
				3/8	7.20	144.00
3-1/2	x	3-1/2	x	1/4	5.80	116.00
4"	x	4"	x	1/4	6.60	132.00
				3/8	9.80	196.00

* May be slightly magnetic when cold worked

STAINLESS STEEL ANGLES
TYPE 316/316L
Annealed and Pickled

Top

Non-Magnetic*
ASTM A 276 Cond. A ASTM A 479 Cond. A
ASME SA-479 Cond. A QQ-S-763 Cond. A
Standard Lengths: 20 Ft. Random

Size in Inches				t	Lbs. Per Ft.	Est. Lbs. Per 20' Bar
1"	x	1"	x	1/8	0.80	16.00
1-1/2	x	1-1/2	x	1/8	1.23	24.60
				3/16	1.80	36.00
				1/4	2.34	46.80

Size in Inches				t	Lbs. Per Ft.	Est. Lbs. Per 20' Bar
2"	x	2"	x	3/16	2.44	48.80
3"	x	3"	x	1/4	4.90	98.00
				3/8	7.20	144.00

* May be slightly magnetic when cold worked

Disclaimer: All technical data throughout this site is given only as an indication of what may be expected and should under no circumstances be used in specifying the raw materials. The technical data throughout this site has been obtained from a variety of sources we believe to be accurate, but is NOT GUARANTEED. A & C Metals - Sawing, Inc. assumes no liability whatsoever for the use of or reliance upon this information.